Techno Press

Home

Editors-in-Chief
Prof. Jeong Yong Lee

    Department of Materials Science and Eng.
    Korea Advanced Institute of Sci. & Tech.
    Daejeon 34141, Korea

    Prof. Seunghwa Ryu

    Department of Mechanical Eng.
    Korea Advanced Institute of Sci. & Tech.
    Daejeon 34141, Korea

Associate Editor
Prof. Mohamed Henini

    Department of Applied Physics
    The University of Nottingham,
    Nottingham NG7 2RD, UK

    Prof. Richard J. Spontak

    Dept. of Chem.&Biomol. Eng.&Mater. Sci. Eng.
    North Carolina State University
    Raleigh, NC 27695, USA

    Prof. Mengtao Sun

    School of Mathematics and Physics
    University of Science and Technology
    Beijing, 100083, PR China

    Prof. Abdelouahed Tounsi

    Department of Civil Engineering
    University of Sidi Bel Abbes
    22000 Sidi Bel Abbes, Algeria

    Prof. Umapada Pal

    Institute of Physics
    Autonomous University of Puebla
    72000 Puebla, Mexico

Managing Editor
Prof. Chang-Koon Choi

Korea Advanced Institute of Sci. & Tech.
Daejeon 34141, Korea

ESCI

SCIE (Impact factor: 4.3)

ISSN:2287-237X(Print) ISSN:2287-2388(Online)

Vol.16/17 (12 issues) for 2024, Monthly

Hybrid Open Access journal: there is an Optional Open Access Fee of USD 795.

For correspondence: [email protected]

Aims and Scope

The Journal of Advances in Nano Research is an international and interdisciplinary peer reviewed journal. The journal aims to integrate high quality contributions from scientists and engineers alike into a single source of information that serves broad scientific audience. The journal publishes original full research articles, short communications for rapid print of research findings, and review articles. The Journal will also print special reports that feature recent discoveries with potential impact or commentary on a state-of-the-art contribution reported in the scientific literature. The journal anticipates contributions in the synthesis, fabrication, characterization and applications of nanomaterials and nanosystems, molecular simulations and nano-x (nanophysics, nanochemistry, nanotubes, nanobiotechnology, nanomedicine, nanoptics, nanoelectronics, nanomachines/nanodevices, nanocatalysis, nanocomposites, nanomechanics/nanofluidics, etc.)

Editorial Board
Prof. Shaikh Ahmed Southern Illinois Univ at Carbondale Carbondale IL 62901, USA Prof. E.C. Aifantis Aristotle Univ of Thessaloniki Thessaloniki 541 24, Greece Prof. Metin Aydogdu Trakya Univ 22 050-Elm, Edirne, Turkey Dr. Paola Castrucci Univ of Roma Tor Vergata Roma 00133, Italy Dr. Siang-Piao Chai Monash Univ Selangor, Malaysia Dr. Sheng-Po Chang National Cheng Kung University Tainan , Taiwan Prof. Lung-Chien Chen Nat'l Taipei Unive of Tech Taipei 10608, Taiwan Dr. Gianni Ciofani Italian Inst of Tech 16163 Genova, Italy Prof. Bo Cui Univ of Waterloo Waterloo, ON N2L 3G1, Canada Dr. Gennadi Emelchenko Inst of Solid State Physics Moscow 142432, Russia Prof. Morteza Eslamian Univ of Michigan Germantown, MD 20874, USA Dr. Polykarpos Falaras NCSR 'Demokritos' Athens 153 10, Greece Prof. Hicham Fenniri Northeastern Univ Boston, MA, USA Prof. Marcos Fernandez-Garcia Inst of Catalysis & Petrochemistry, Spain Dr. Hamid M. Sedighi Shahid Chamran Univ. of Ahvaz Ahvaz, Iran	Dr. Liang (Alex) Gao Chroma Tech Corp VT 05101, USA Prof. Anil Vithal Ghule Shivaji Univ, Kolhapur 416004, Maharashtra, India Prof. Chang-Sik Ha Pusan Nat'l Univ Busan, 46269, Korea Prof. Yu Han King Abdullah Univ Thuwal, Saudi Arabia Dr. Michele Iafisco National Research Council Faenza, RA, Italy Prof. Xuchuan Jiang Univ of New South Wales Sydney, NSW 2052, Australia Prof. Niranjan Karak Tezpur Univ Tezpur-784028, Assam, India Prof. Michael Keidar The George Washington Univ Washington DC 20052, USA Prof. Vladimir Kukushkin Russian Academy of Sci. Moscow, 119991, Russia Dr. Lifeng Liu Int'l Iberian Nanotech Lab 4715-330 Braga, Portugal Dr. Malik Maaza iThemba LABS-Nat'l Res Found of South Africa Somerset West 7129, South Africa Dr. Suresha K. Mahadeva Univ of British Columbia Vancouver, BC V6T 1Z4, Canada Dr. Yogendra Kumar Mishra Univ of Southern Denmark 6400 Sønderborg, Denmark Prof. Juan Eduardo Escrig Murua Univ of Santiago de Chile O'Higgins 3117, Santiago, Chile Prof. M. Parans Paranthaman Univ of Tennessee Knoxville, TN 37996, USA Prof. John A. Peter Govt Art & Sci College Tamil Nadu, India	Dr. V. Rajendran K.S. Rangasamy College of Tech Tiruchengode- 637 215, India Dr. Elena A. Rozhkova Argonne Nat'l Lab Argonne, IL 60439, USA Prof. Alexander Samardak Far Eastern Federal Univ Vladivostok, Russia Prof. Karthik Shankar Univ of Alberta Edmonton AB T6G 2R3, Canada Prof. Young-Seok Shon California State Univ Long Beach CA 90840, USA Prof. Liangfeng Sun Bowling Green State Univ Bowling Green, OH 43403, USA Prof. Ujjal Kumar Sur Univ of Kolkata Kolkata, 700032, India Dr. Youhong Tang Flinders Univ Adelaide, 5042, Australia Prof. Vinoy Thomas Univ of Alabama at Birmingham Birmingham, AL 35294, USA Prof. Francisco Torrens Univ of Valencia Valencia E-46071, Spain Prof. Giovanni Valdre Univ of Bologna 40126 Bologna, Italy Prof. Chuanyi Wang Chinese Academy of Sci. Beijing 100190, China Prof. Zengbo Wang Bangor Univ Gwynedd, LL57 2DG, UK Prof. Xuefeng Yu Shenzhen Inst Adv Tech Shenzhen, P.R. China Prof. Min Seok Jang KAIST Daejeon, Korea

Guide to Authors (Last updated: Oct 25, 2023)

1. Submission of the paper

Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) (http://www.techno-press.com/papers). Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[[email protected]]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers. Authors should carefully check if their paper satisfied all the requirements in the preliminary list before submission.

2. Preparation of the manuscript

General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 12-24 journal pages. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures and tables are required to be placed at the suitable locations in the text.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide.

3. Review

All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs

Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright

Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics

General: Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors (https://publicationethics.org/node/11184). Violation of publication ethics will result in the activation of COPE flow chart. (https://publicationethics.org/guidance/Flowcharts)
Authorship: Authors are encouraged to check ICMJE's guideline for authorship. (http://www.icmje.org/icmje-recommendations.pdf). Authorship problems will be dealt with according to COPE flowcharts. (https://publicationethics.org/authorship)

7. Open Access

There is an option of publishing your paper as Open Access. When you receive a formal acceptance email, you will find a link that you may click on to pay the Article Processing Charge (APC) for Open Access publishing.

Forthcoming Articles

Tentative titles of forthcoming papers

* KA Dawson New separation technologies for nanoparticle-cell mixtures; * Dr. K Harigaya Electron density distribution of bilayer nanographene and band structures of boron carbon nitride systems; * Dr. VPS Awana Impact of nano particles doping on high performance of MgB2 superconductor; * Prof. IC Gebeshuber Bionanoconvergence: challenges and prospects; * Prof. M Maaza Photoinduced phenomena in selected nano-structured oxides; * Dr. U Pal Controlling the morphology of ZnO nanostructures in ultrasonic synthesis; * Dr. U Pal Thermo- and photoluminescence behaviors of Ag-doped ZnO nanoparticles; * Dr. D. Keidar A review of ultracapacitors based on carbon nanotubes and graphene; * Prof. GA Emelchenko Development of porous nanostructures with inverse opal lattice; * Prof. M Fernandez-Garcia Ag, Cu and Zn promoted TiO2 photo-killing activity: a comparison of inorganic powders and polymer-based nanocomposite films; * Prof. A Tounsi Nonlocal effects on thermal buckling properties of double-walled carbon nanotubes; * Prof. V Kessler Synthesis of small late transition metal and alloy nanoparticles by Bradley reaction; * Prof. J Badur Generalized boundary conditions for Navier-Stokes equations accounting friction and mobility nano-forces; * Prof. YS Shon Preparation of bimetallic nanoisland films from layer-by-layer assembled nanoparticle multi-layers; * Dr. SP Chai Preparation of superhydrophobic thin films using non-aligned carbon nanotubes; * Prof. AN Nazarov High-resolution electrical and surface morphological characterization of nanoscaled carbon channel cold emitters fabricated on basis of carbon-rich a-SiC layers; * Prof. JEE Murua Magnetic nanotubes: reversal modes and interactions;

Some prospective authors

* Dr. CA Barbero; * Dr. R Boukherroub; * Prof. EL Bourhis; * Dr. P Castrucci; * Dr. P Falaras; * Dr. GG Gruzadyan; * Dr. SJ Haam; * Prof. Y Han; * Prof. N Hanagata; * Prof. JY Lee; * Prof. JF Lin; * Dr. IL Medintz; * Prof. F Mollaamin; * Dr. SMS Murshed; * Prof. V Narayanan; * Prof. VH Phan; * Dr. A Phuruangrat; * Prof. N Pugno; * Dr. F Torrens; * Dr. G Valdre

Table of Contents.


		2024 Volume 17 No. 1	No.2 No.3 No.4 No.5
		2024 Volume 16 No. 1	No.2 No.3 No.4 No.5 No.6
		2023 Volume 15 No. 1	No.2 No.3 No.4 No.5 No.6
		2023 Volume 14 No. 1	No.2 No.3 No.4 No.5 No.6
		2022 Volume 13 No. 1	No.2 No.3 No.4 No.5 No.6
		2022 Volume 12 No. 1	No.2 No.3 No.4 No.5 No.6
		2021 Volume 11 No. 1	No.2 No.3 No.4 No.5 No.6
		2021 Volume 10 No. 1	No.2 No.3 No.4 No.5 No.6
		2020 Volume 9 No. 1	No.2 No.3 No.4
		2020 Volume 8 No. 1	No.2 No.3 No.4
		2019 Volume 7 No. 1	No.2 No.3 No.4 No.5 No.6
		2018 Volume 6 No. 1	No.2 No.3 No.4
		2017 Volume 5 No. 1	No.2 No.3 No.4
		2016 Volume 4 No. 1	No.2 No.3 No.4
		2015 Volume 3 No. 1	No.2 No.3 No.4
		2014 Volume 2 No. 1	No.2 No.3 No.4
		2013 Volume 1 No. 1	No.2 No.3 No.4

Subscription

2021 Subscription Rates

USD
Advances in Nano Research Volume 10/11 (12 issues)	Print +e		Online +c		Airmail*
Institutional Subscription		807		640	+75

Orders are accepted by calendar year only.

1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
3. Personal Subscription Rates : Please inquire at [email protected].

Research and Publication Ethics

All the editors, publishers, researchers, and peer reviewers of Techno-Press journals strongly encourage to carefully review and follow the Committee on Publication Ethics (COPE) guidelines:(https://publicationethics.org/guidance/Guidelines)

1. Authorship

Authorship credit should be based on
    (1) Substantial contributors to the conception or design of the work or the acquisition, analysis
   or interpretation of data for the work,
    (2) Drafting the work or revising it critically for important intellectual content,
    (3) Final approval of the version to be published, and
    (4) Agreement to be accountable for all aspects of the work in ensuring that questions related
   to the accuracy or integrity of any part of the work are appropriately investigated and resolved.
Authors should meet these four conditions after the initial submission of a manuscript and any changes whatsoever in authorship (adding author(s), deleting author(s), or re-arranging the order of authors) must be explained by a letter to the editor from the authors concerned. This letter must be signed by all authors on the paper. Techno-Press does not correct authorship after the final acceptance unless a mistake has been made by the editorial staff. Authorship may be changed before the final acceptance when the authorship correction is requested by all of the authors involved with the manuscript. The corresponding author takes primary responsibility for communication with the journal during the manuscript submission, peer review, and publication process. The corresponding author should be available throughout the submission and peer review process to respond to editorial queries in a timely manner, and should be available to respond to critiques of the work and cooperate with any requests from the journal for data or additional information or questions about the paper even after publication.

2. Originality, plagiarism and duplicate publication

Submitted manuscripts must not have been previously published or be under consideration for publication elsewhere. No part of the accepted manuscript should be duplicated in any other journal without the permission of the Editorial Board. Submitted manuscripts are checked for possible plagiarism or duplicate publication upon the paper’s arrival. If plagiarism or duplicate publication is detected, the manuscripts may be rejected, the authors will be announced in the journal, and their institutions will be informed. There will also be penalties for the authors. A letter of permission is required for any and all material that has been published previously. It is the responsibility of the author to request permission from the publisher for any material that is being reproduced. This requirement applies to text, figures, and tables.

3. Conflict of interest statement

The corresponding author must inform the editor of any potential conflicts of interest that could influence the authors’ interpretation of the data. Examples of potential conflicts of interest are financial support from or connections to companies, political pressure from interest groups, and academically related issues. In particular, all sources of funding applicable to the study should be explicitly stated.

4. Process for managing research and publication misconduct

When the journal faces suspected cases of research and publication misconduct, such as redundant publication, plagiarism, fraudulent or fabricated data, changes in authorship, undisclosed conflict of interest, ethical problems with a submitted manuscript, appropriation by a reviewer of an author’s idea or data, and complaints against editors, the resolution process will follow the flowchart provided by COPE, https://publicationethics.org/guidance/Flowcharts.
The discussion and decision on the suspected cases are carried out by the Editorial Board.

5. Editorial responsibilities

The Editorial Board will continuously work to monitor and safeguard publication ethics:
* Guidelines for retracting articles;
* Maintenance of the integrity of academic records;
* Preclusion of business needs from compromising intellectual and ethical standards;
* Publishing corrections, clarifications, retractions, and apologies when needed; and
* Excluding plagiarized and fraudulent data.
The editors maintain the following responsibilities:
* Responsibility and authority to reject and accept articles;
* Avoid any conflict of interest with respect to articles they reject or accept;
* Promote the publication of corrections or retractions when errors are found; and
* Preserve the anonymity of reviewers.

\| Home \| Aims and Scope \| Editorial Board \| Table of Contents \| Guide to Authors \| Ethics \|